!!! Discontinued Product !!!

PIP5
Power Performance

The PIP5 is a highly integrated robust Industrial PC with a special designed EMC protected aluminum housing. The design integrates standard connectors for easy connection and inexpensive installation. The unit can be used for any PC Application where a complete solution is needed.

The PIP5 can be used in a standard or in a rugged operating environment and is 100% PC/AT compatible.

The PIP housing offers space for a hard disk or expansion if needed on the PC/104. Fully bootable Flash Disks are support for project where hard disks or floppy cannot be used.

Special efforts have been taken on the quality of the components and its long term availability (5 years). Another PIP specialty is the extreme low power consumption of the system. This allows to operate the system without fan or ventilation holes. Further can the PIP5 be used in applications where extended temperature is a must.

Certainly special precaution have been taken on the EMC on the total system to fulfill the CE and FCC requirements.

All these features and its reasonable cost make the PIP5 to the ideal solution for the industry where a flexible, rugged long term available complete Industrial PC is needed.

Technical Features PIP5

Electrical
Processor	AMD Elan™SC520, 32-Bit low power CPU,133MHz	Industry-standard Am5x86-133MHz, 16kbytes write-back/through cache
BIOS	256kB Flash EEPROM, easy update	MPL engineered BIOS (General Software)
SDRAM	168-pin DIMM module socket	Up to 256MB SDRAM
FLASH	44-pin header for IDE Flash modules	Up to 1GB Flash, bootable
Multi Purpose Socket	Supports SRAM, FLASH, EPROM	28 & 32-pin DIL, up to 512kB memory size
RTC & CMOS-RAM	backed with on-board battery, field exchangeable	CMOS setup can be saved in EEPROM
SVGA Interface	C&T69000 video accelerator resolution up to 1280 x 1024 flexible panel support for STN, TFT	15-pin D-SUB connector refresh rate up to 85Hz 50-pin remote MMi module socket
4 x Serial Ports	2 ports can be modified optionally to RS422/485 half & full duplex, electrically fully isolated	2 x 9-pin D-SUB and 1 x 25-pin D-SUB connector
2 x USB Ports	USB 1.1 (up to 12Mb/s)	2 x Type A connector
Parallel Port	config. as LPT1...3, SPP,EPP, ECP (IEEE1284)	25-pin D-SUB connector
E-IDE Port	ANSI Standard mode 0, 1 and ; up to 4 drives	Standard 44-pin & 40-pin header
FDD Port	One port for up to 2 drives	Connection for internal or external device
CAN Bus	Opto-isolated CAN Bus interface (CAN Spec. 2.0)	9-pin D-SUB connector
Expansions	full 16-bit PC/104 and full 32-bit PC/104+ interface
Speaker Port	Easy connection of speaker	internal 4-pin header
Keyboard	PS/2 interface	6-pin mini DIN connector
Mouse	PS/2 interface	6-pin mini DIN connector
Watchdog	distinct keyed write sequence	Programmable time-out
Timer	Two 16/32-bit TTL Timer output signal	available over 4-pin header
Indicator	6 activity LED's + 2 user definable	Power, Reset, HDD, SCSI, LAN, LAN100
Reset Button	On chassis (protected) and a remote reset button
On-board option
SCSI Interface	ASPI, SCAM and Fast SCSI compatible	50-pin SCSI-2 connector
Ethernet	10BaseT / 100BaseTX Fast 10/100Mbit/s	RJ45 supports IEEE802.3 auto negotiation
Physical / Power
Chassis	Rugged chromated aluminum chassis with best EMI protection, also after years	DIN-rail, wall mounting, desk top version
Size & weight (standard)	270 x 162 x 62mm (L x W x H) / 2.2kg	10.6 x 6.4 x 2.4 inch / 4.85 pounds
Power	On boards high efficiency switching regulator	8 - 28VDC supply power
Power consumption	typically < 7 Watts	12VDC, 133MHz, 64MB SDRAM, 10GB HDD
Temperature Range	-20°C up to 60°C, optional -40°C up to 75°C	No fan or opening in housing are required
Humidity	5% - 95% non condensing	Optional coating available
Standard Compliance
The PIP5 is designed to meet or exceed the most common standards. Particular references are:
EMC	EN 55022, EN 55024, EN 61000, MIL-STD-461E
Shock & Vibration	EN 60068
Environmental & Safety	EN 50155, MIL-STD-810-F, EN 60601, EN 60950
Approval Lists	CE, IEC 60945, IACS E10

PIP5 Versions

Reference	Description
PIP5-1	Low Power 5x86-133MHz CPU (ELAN520) with on-board CAN, SXGA, 2x USB1.1, 4x RS232, 10/100 Ethernet, SCSI-2, PC/104....
PIP5-2	Low Power 5x86-133MHz CPU (ELAN520) with on-board CAN, SXGA, 2x USB1.1, 4x RS232, 10/100 Ethernet, PC/104....
PIP5-Cx	PIP Solution assembled & mounted according to customer needs & requirements (e.g. with or without housing, depopulated parts, installation of specific connectors, installing a customers application, etc.)

Extended Temperature Option

Reference	Description
XTEST-2	extended temperature test -40° C up to +75° C

For deployment in harsh environments, the PIP5 can be ordered in an extended temperature version. Every system needs to pass various tests in a environmental chamber to prove that it will perform flawless over the temperature range indicated.
Please note: In order to get a system that will operate under these conditions, all additional selected components like hard disks or extension cards have to be specified or tested for conformity to the extended temperature range.