Manuals, Data Sheets, and Press Releases can be found in the MPL Documentation area of this homepage.
|Question #429:||I'm having trouble to establish a communication using the µTX2FX. The device has power, the SFP used is MSA compatible and working in another system. What's wrong?|
|Answer:||Please make sure that the connection speeds on the copper- and on the fibre-side of the µTX2FX are identical.
The PHY-based µTX2FX, in contrast to the Switch-based TX2FX, does NOT support speed translation between its copper and fibre ports.
In other words: 100Mbps on copper and 1Gbps on fibre will NOT work, and vice versa.
|Question #305:||Where can I download a driver for the TX2FX | µTX2FX?|
|Answer:||The TX2FX | µTX2FX is a simple media converter and does not need a driver.
Minimal configuration is done using the DIP switches on the PCB. Please check the "TX2FX User Manual" for more info.
|Question #304:||What IP address is the TX2FX | µTX2FX using? How can I assign a static IP address?
|Answer:||The TX2FX | µTX2FX is a simple media converter (working on OSI layer 2) and therefore completely transparent to IP traffic. There is no IP address associated with the TX2FX | µTX2FX.|
|Question #427:||I'm having some trouble to connect the copper ethernet header signals of your µTX2FX correctly to my hardware.
Which of the DPx signals do I have to use?
|Answer:||If you are used to the TIA-568 signal naming scheme, the mapping is as shown below: