Additional USB Module

USBBACK-6

The USBBACK-6 expansion module is available for the CEC10 Family. It provides six additional USB 2.0 via the backplane interfaces.
The lockable connectors allow easy integration into an existing system.

Features

6 x USB 2.0 (header) on short backplane
6 x USB 2.0 on headers for additional USB ports or serial modules (RS232/422/485)

Additional 4x USB and 3x RS232

USM-1

For the CEC10 Family, there is an expansion for additional 4x USB2.0 and 3x RS232. With the USM-1 module, these additional ports are integrated in a 62mm housing.
The BACK-1 option is required.

Third Party mPCIe Modules

Additional 4x Serial Ports (4SER-mPCIe-1)

For the CEC10 Family, there is an expansion for additional 4x serial ports like RS232, RS422 or RS485 via an mPCIe module.

Features

XR17V354 PCIe interface quad UART with 256-byte FIFOs and 16 GPIO lines
SP336 multi-mode transceivers support RS232, RS422, and RS485
4 RS232/422/485 serial ports with protocol selected by software via the GPIO lines or jumpers
RS422/485 termination jumper selectable
+/-15KV ESD protection on all serial ports

Additional 8x Serial Ports (8SER-mPCIe-1)

For the CEC10 Family, there is an expansion for additional 8x serial ports like RS232, RS422 or RS485 via an mPCIe module.

Features

PCIe 2.0 compliant. RS232/422/485 mode configurable by software
Up to 25 Mbps serial data rate. 16C550 compatible. 256- byte FIFOs
Industrial temperature(-40°C to 85°C) operation
Flexible design with cable and daughter board x 8 (DB-9 connectors)
Termination resistor and 5V/12V output by jumper setting on daughter board