The MCRW-G (Memory Card Reader Writer) is a reader/writer with one card slot for PCMCIA/JEIDA compatible memory cards. These cards are widely used in the industry, mobile computers and are available from many manufacturers in various sizes and types. The MCRW-G contains sophisticated software that automatically analyses and handles all card specific parameters and therefore supports a wide variety of cards of any size: ATA FLASH, CompactFlash*, SmartMedia*, PCMCIA hard disk, SRAM, ROM, OTP, E(E)PROM, FLASH , as well as User specific I/O cards.
To interface those cards to the Host equipment the MCRW-G has an RS-232 interface with a selectable Baud rate. Simple straight forward commands allow complete remote control of the unit out of any application written in any language and without the need of an operating system. The card slot accepts all PC Cards size up to type III.
Manuals, Data Sheets, and Press Releases can be found in the MPL Documentation area of this homepage.
|Desktop case (56 x 179 x 215 mm)||X|
|Single PC Card slot for Type I -III card||X|
|PC-ATA card support||X|
|SRAM read and write||X|
|ROM, EPROM, FLASH, OTP read||X|
|FLASH memory write/erase||X|
|User specific I/O card access||X|
|FORTEZZA Cryptocard and compatible||X|
|Electrical & Connections|
|Supply voltage (90-264V/50-60Hz)||X|
|Current consumption (max)||15 W|
|RS-232 Interface connector||DB-25, female|
|Baudrate||300 .. 38.4 kbit/sec|
|Temperature range 5°C.....40°C||X|
|UL listed and FCC Class B compliant||X|