µMAGBES / MAGBES Downloads

Updates of the BIOS, Firmware, and Manuals for the MPL products are always being announced in our Newsletter.
Please sign up for the MPL AG Newsletter to receive that information.


µMAGBES Remark
Firmware V 0.6.7 Changelog:
- Add 100MBit SGMII SFP support for µMAXBES
- Add thermal shutdown for the 10GBit PHY on µMAXBES-RJ1
- Purge all ATU entries of a port if the link drops
- fixing source port detection of a frame on slave ports
- add support for 8 port µMAGBES
 
MAGBES-21/-22/-23 Remark
Firmware V 0.6.7 Changelog:
- Add 100MBit SGMII SFP support for µMAXBES
- Add thermal shutdown for the 10GBit PHY on µMAXBES-RJ1
- Purge all ATU entries of a port if the link drops
- fixing source port detection of a frame on slave ports
- add support for 8 port µMAGBES
 
MAGBES-11/-12/-13 Remark
Firmware V 0.6.7 Changelog:
- Add 100MBit SGMII SFP support for µMAXBES
- Add thermal shutdown for the 10GBit PHY on µMAXBES-RJ1
- Purge all ATU entries of a port if the link drops
- fixing source port detection of a frame on slave ports
- add support for 8 port µMAGBES
 

Updates Notes:
- If updating from a version below V 0.4.0 the system status page will be displayed in the main-frame on the first boot. Use the
  refresh button of your browser to get the correct display.
- Do not remove the power during the update procedure.
- Due to adding/changing various configuration values it may happen that the MAGBES/MAXBES will disable some configurations.
- It is not recommended to update the firmware in a production network.


MPL-GENERAL-MIB.txt MIB for network products from MPL

3D STEP files Remark
MAGBES-nn.step please contact MPL at to request this STEP file. It will be sent to you by email in zip format.


 Copyright © 1997-2022 MPL AG Elektronikunternehmen, a member of the HT Holding AG  |  Privacy Statement
MPL on LinkedIn    MPL on twitter