PIPVIN-X

PIP Voltage Input

The PIP Voltage Input module (PIPVIN-x) gives you the option to expand the PIP input voltage range. With a PIPVIN, the standard PIP input voltage range 8-28V can be expanded to 18-48V or 9-36V. The used DC/DC-Converter offers a maximum of 50W output power.

• 50W output, optional with complete galvanic isolated input
• Efficiency 85%
• Temperature range -40°C to +75°C under full load
• Remote sensing for output voltage control
• Short circuit protection
• Passive cooling with five-sided metal case
• Lockable connector

Suitable for

The PIPVIN can be used with any PIP from MPL.

Restrictions

1. For cooling, the PIPVIN has to be mounted on the cover of the PIP housing.

2. Minimal housing size required for internal PIPVIN-x
PIP62-1: only possible if no additional PC/104 or PC/104-Plus card is installed!
PIP83-1: with this housing, up to two additional PC/104 or PC/104-Plus cards can be installed along with the PIPVIN-X.
PIP120-1: with this housing, up to four additional PC/104 or PC/104-Plus cards can be installed along with the PIPVIN-X.

 

PIPVIN Versions & Installation Options

    >For extended input voltage range
    >Galvanic isolation & extended input voltage range
 

For extended input voltage range
Reference	Description
PIPVIN-4	extends PIP input voltage range to 18-48V, 12V output with 50W DC/DC converter. Input and Output Ground are hot-wired and connected to the PIP case.
PIPVIN-6	extends PIP input voltage range to 9-36V, 12V output with 50W DC/DC converter. Input and Output Ground are hot-wired and connected to the PIP case.
PIPVIN-Cx	extends PIP input voltage range according your needs! Talk to us.

Galvanic isolation & extended input voltage range
Reference	Description
PIPVIN-4G	modification of the PIP input voltage range to 18-48VDC and galvanic isolation of the PIP input voltage signals from the PIP internal power signals. The used DC/DC converter offers 12V output and max. 50W. The negative DC/DC converter output is still hot-wired to the PIP case.
PIPVIN-6G	modification of the PIP input voltage range to 9-36VDC and galvanic isolation of the PIP input voltage signals from the PIP internal power signals. The used DC/DC converter offers 12V output and max. 50W. The negative DC/DC converter output is still hot-wired to the PIP case.
PIPVIN-CxG	extends PIP input voltage range according your needs! Talk to us.

 Copyright © 1997-2010 MPL AG Elektronikunternehmen, a member of the HT Holding AG