|Network Option||PIP Option||CEC Option|
The µEPI is an ultra small form factor Ethernet Power Injector. Its main purpose is to upgrade products without PoE
port to a PSE solution (Power Sourcing Equipment). The µEPI comes with either lockable headers and RJ45 or with lockable headers only.
PoE is a network function,which is defined in IEEE Standards 802.3af and 802.3at. The µEPI supports up to 30W power (PoE+). The PoE is to the supply PoE devices like wireless access points, IP cameras, and VoIP phones, to name just a few. Power for the µEPI needs to be added depending on the power requirement of the connected device.
The module supports up to of 57V and the PoE+ power classes (class 0 up to class 4)
The temperature range of the µEPI is -40°C up to +85°C. The size is only 62 x 28 x 20mm.
|Board Key Data|
|PoE+||According IEEE 802.3at-2009
|PoE+ Voltage||From device or externally supplied
+44 .. +57 V (Power Classes 0 .. 3)
+50 .. +57 V (Power Class 4
|PoE+ Power||15.4 W (Class 0)
4 W (Class 1)
7 W (Class 2)
15.4 W (Class 3)
30.0 W (Class 4)
|PCB Form Factor||Length: 62 .. 65.2 mm ((depends on interface connector used))
Width: 28 mm
Height: < 20mm
|Storage Temperature||-45°C to 85°C (-49°F to 185°F)|
|Operating Temperature||-40°C to 85°C (-40°F to 185°F)|
|Relative Humidity||5% to 95% none condensing