24-bit LVDS Adapter
| Reference | Description |  |
|---|---|---|
| DOLL-1 | 24-bit LVDS adapter for PIP20 platform. The "sDVO Link to LVDS module" (DOLL-1) gives you the option to connect a 24-bit LVDS LCD with 16M colors to the Core Duo based PIPs. |
Serial UPS module
| Reference | Description |  |
|---|---|---|
| BOLD-1 | Brownout and Load Dump module for PIP10 and PIP20 platform. Detects voltage drop on input and looks for a safe shut down of the PIP. The module is installed on SERIF connector of serial 4. The solution requires an additional LiPoly-accumulator! | |
| PIPBATT-4 | LiPoly-Accumulator installed inside PIP, matches to BOLD-1. (11.1V, 1.5Ah) |
Backup System for the rugged environment
| Reference | Description |  |
|---|---|---|
| SPINAL | The SPINAL is mainly designed to protect the MPL industrial products from various input voltage failures. This includes reverse polarity, over voltage, load dump effects and brown out failures. |
Hot Swap RAID expansion
| Reference | Description |  |
|---|---|---|
| HSRAID-1 | Hot Swap capable RAID expansion for all Core Duo based PIPs. HDD/Flash disk assembly kit with easy removable HDD drawers on the left side of the case (above power module), including backplane PCB , internal cabling and mechanics. |
Dual display expansion
| Reference | Description |  |
|---|---|---|
| SDLD-1 | Additional 2nd external digital graphic port on a DVI connector. Usable with all Core Duo based PIPs equipped with sDVO interface as example: PIP20-1 and PIP22-1 (PIP20 family). |
Firewire-Kit1
| Reference | Description |  |
|---|---|---|
| Firewire-Kit1 | Adds a second FireWire port to the PIP front (on Core Duo Solutions) |
CAN module
| Reference | Description |  |
|---|---|---|
| PIPCAN-1 | Isolated CAN module can be added into all Celeron M, Pentium M, and CoreDuo solutions. Interface externally
accessible on Serial-2 DB-9 connector of the PIP. Module fix mounted on PIP board. Caution: Occupies optional Serial 2 port. |
|
| PIPCAN-2 | Isolated CAN module can be added into all Celeron M, Pentium M, and CoreDuo solutions. Interface externally accessible on additional DB-9 connector anywhere on the PIP front. Module is mechanically mounted on PIP front via DB-9 connector. |
Input Protection module
| Reference | Description |  |
|---|---|---|
| PIPLD-1 | Reverse voltage and load dump protection module for PIPs |
Standard PCI slot extension
| Wintergarden Solution (440mm length) |  |
|
|---|---|---|
| PIPPCI-1 | PCI extension of the 62mm PIP allowing to install 1 half size PCI card, no PC/104 or PC/104-Plus | |
| PIPPCI-2 | PCI extension of the 82,5mm PIP allowing to install 1 half size PCI card and 1 PC/104 or PC/104-Plus Note: with expansion EXP1-1 one additional PC/104 card can be added. |
|
| PIPPCI-3 | PCI extension of the 82,5mm PIP allowing to install 2 half size PCI card and 1 PC/104 or PC/104-Plus,
including PCI Power supply direct from V-in Note: with expansion EXP1-1 one additional PC/104 card can be added. |
|
| PIPPCI-4 | PCI extension of the 120mm PIP allowing to install 4 half size PCI card and 2 PC/104 or PC/104-Plus
including PCI Power supply direct from V-in Note: - in PIP5, PIP6, PIP7-1/-2 & PIP8-1/-2 only one additional PC/104-Plus card (with expansion EXP1-1 two additional PC/104 cards) - in all Celeron M, Pentium M and CoreDuo solutions (excl. PIP10-2) two additional PC/104-Plus cards (with EXP1-1 two additional PC/104 cards) |
|
PMC slot extension
| Reference | Description |  |
|---|---|---|
| PIPPMC-1 | PMC extension of the 82,5mm PIP, allowing up to 3 PCI Mezzanine Cards and 1 PC/104-Plus card |
Extended Voltage Input range
| Reference | Description |  |
|---|---|---|
| PIPVIN-4 | Extends PIP input voltage range to 18-48V, 12V output with 50W | |
| PIPVIN-6 | Extends PIP input voltage range to 9-36V, 12V output with 50W | |
| PIPVIN-4G | Extends PIP input voltage range to 18-48V, 12V output with 50W (galvanic isolation) |
|
| PIPVIN-6G | Extends PIP input voltage range to 9-36V, 12V output with 50W (galvanic isolation) |
GPS module
| Reference | Description |  |
|---|---|---|
| SePS-2 | GPS Module mounted on SERIF socket of the PIP/CEC and connected to one of the serial ports. 12-channel, 2-ports, 1PPS, differential GPS ready. Supports TSIP, TAIP & NMEA, with backup battery. | |
| SePSANT-1 | Miniature Magnetic Mount GPS Antenna, 16.4′ (5m) coax with MCX RF connector, environmentally sealed with magnet and 2 mounting screw holes. |
RS232 and RS422/485 modules
| Reference | Description |  |
|---|---|---|
| SERIF-1 | Additional RS232 interface for the PIP/CEC. Maximum 2 modules possible! | |
| SERIF-2 | Additional RS422/485 interface for the PIP/CEC. Maximum 2 modules possible! |
Additional USB ports
| Reference | Description |  |
|---|---|---|
| FUNI-KIT2 | Adds two additional USB ports to the PIP front (Core Duo solutions) |
Sound module
| Reference | Description |  |
|---|---|---|
| SoundPAN-1 | AC97 sound module for PIPs mounted on PIP lid and wired to the internal on-board AC97 interface. Externally available on the user slot are; Line IN, Line OUT, Headphone and MIC on 3.5mm Jack |
Ethernet Media Converter
| Reference | Description |  |
|---|---|---|
| TX2FX-11M | Module built-in (inside PIP), RJ45 and SFP ports external accessible | |
| TX2FX-12M | Module built-in (inside PIP), RJ45 port internal connected to PIP onboard Ethernet, SFP port external accessible |
WLAN module
| Reference | Description |  |
|---|---|---|
| WLAN-USB | 802.11b/g/n Wireless LAN USB module mounted inside PIP | |
| WLANANT-1 | Antenna assembly for WLAN-1USB with 33cm coaxial cable and rubber antenna |